Data rescue 4 manual1/8/2024 ![]() ![]() Users\\AppData\Roaming\Ableton\Live x.x.x\Preferences\Crash\ Locate the following folder and make sure to read our dedicated article on how to access hidden folders: Note: The process of file recovery needs to be accomplished with the same Live version which created the undo file and caused the problem. Once the files have been renamed and moved out of the folder as explained below, the Set can often be recovered. In case the process doesn't happen automatically, or if you clicked "No" on the restore document dialog, the relevant files needed to recover the set are moved into a folder named "Crash" located in Live's preferences folder. Choose an option and follow the on-screen prompts to complete the rescue.Live's file recovery process is usually triggered by an undo file in Live's preferences folder.Enter the NAS’s MAC address and choose Connect.From a computer on the network, launch a web browser and enter.The power button LED blinks as the NAS boots.Continue to push the recovery button for five seconds. ![]() Hold the recovery button while applying a short push on the power button (see Operation for further details on a short push.).See System Overview for the location of the recovery button. paperclip, thin screwdriver, etc.) to push the recovery button. If you cannot access NAS OS, apply a long push Operation. ![]() If the NAS is powered on, use NAS OS to shut down the NAS.Confirm that users on the network are not accessing the NAS.Check the MAC address label on the back of your device and note one of the MAC addresses. Your NAS OS device has two MAC addresses, one for each LAN port (see the hardware user manual for your device). Once it is enabled, the NAS OS rescue prompts you for the NAS's MAC address. To push the recovery button, you will need a thin pointed object such as a paperclip or a small screwdriver. The recovery button is located on the back of the NAS within a small recessed niche. The NAS OS rescue tool is enabled upon booting the NAS by simultaneously pushing the Recovery and power buttons. Otherwise, apply a short push to the power button. If you have access to NAS OS, use the power icon on the upper right of the window to select Shutdown. If you cannot access the NAS volumes, the rescue provides an option to retrieve data via FTP.įollowing the backup (if applicable), turn the NAS off. To guarantee that data stored on the NAS is preserved, Seagate highly recommends that you back up all shares before moving forward with the Installer. The NAS OS rescue will attempt to repair or reset the NAS OS. Since all data will be deleted during the format, Seagate highly recommends that you back up your files before selecting this option. Format the drives and install NAS OS: The Installer will format the NAS's hard drives before reinstalling NAS OS.Users, General, Network, etc.) to their original states. Factory default includes the reversion of all NAS OS parameters (e.g. ![]() Seagate cannot guarantee that all your data will be saved.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |